Home > Chapter 10: Baseload Measures > 10.4 Clothes Washer Selection/Replacement
10.4 Clothes Washer Selection/Replacement
Observe the following standards to minimize the energy consumption of clothes washers.
10.4.1 Clothes Washer Selection
Comply with these requirements when selecting a new clothes washer.
ü Select clothes washers that meet or exceed Energy Star® and WaterSense® specifications.
ü Maintain adequate clearance around appliance when fit into the available space, so access to cabinets and light switches aren’t blocked.
ü Appliance must be covered by a minimum one-year warranty.
ü Standby losses for clothes washers must be one watt or less.
10.4.2 Clothes Washer Installation
Comply with these requirements when installing a new clothes washer.
ü Install clothes washers in accordance with manufacturer specifications, (including leveling, plumbing connections, electrical connections) and meet all applicable codes.
ü Install shut-off valves on hot and cold supply water if not already present.
ü If located in conditioned or finished area, install an overflow pan and drain the pan to a safe location
ü Air seal any penetrations to the exterior of the home created by the washer’s installation.
ü Demonstrate energy-related appliance controls to the occupant.
ü Provide specific information about proper maintenance of the washer to the occupant.
ü Provide warranty information, operation manuals, and installer to the owner.